Show simple item record

dc.contributor.authorNgoc Vinh Pham
dc.contributor.authorTakeshi Miyashita
dc.contributor.authorKazuo Ohgaki
dc.contributor.authorYuya Hidekuma
dc.contributor.authorTakuya Harada
dc.date.accessioned2022-01-30T22:45:33Z
dc.date.available2022-01-30T22:45:33Z
dc.date.issued1/1/2021
dc.identifier.other(ASCE)ST.1943-541X.0002862.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl1/handle/yetl/4269543
dc.description.abstractIn steel truss bridges, severe damage due to corrosion at gusset plate connections has been widely reported. This study investigated the effectiveness of a repair method using carbon-fiber-reinforced plastic (CFRP) sheets for corroded gusset plate connections. Loading tests were conducted with a model approximately 50% of the size of actual gusset plate connections and a corrosion level of approximately 50% of the gusset plate thickness. Further, loading tests were carried out by varying the area, direction, and location of the bonded CFRP sheets. Results showed that the proposed repair method recovered the load-carrying capacity and improved the deformation performance of the corroded gusset plate connections. Three-dimensional finite element (FE) analyses, which considered the nonlinear properties of materials, anisotropic performance of CFRP sheets, and bond-slip model of the polyurea putty layer inserted between the corroded gusset plate and CFRP sheets, were implemented to validate the experimental results. By varying the bond-slip properties of the polyurea putty layer within the fluctuation range of measured data, this study accurately reproduced the experimental results and clarified the polyurea putty layer’s influence on the load-carrying capacity, deformation performance, and failure behavior of the corroded gusset plate connections bonded to CFRP sheets.
dc.publisherASCE
dc.titleRepair Method and Finite Element Analysis for Corroded Gusset Plate Connections Bonded to CFRP Sheets
dc.typeJournal Paper
dc.journal.volume147
dc.journal.issue1
dc.journal.titleJournal of Structural Engineering
dc.identifier.doi10.1061/(ASCE)ST.1943-541X.0002862
dc.journal.fristpage04020310
dc.journal.lastpage04020310-22
dc.page22
dc.treeJournal of Structural Engineering:;2021:;Volume ( 147 ):;issue: 001
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record