Show simple item record

dc.contributor.authorXiao-Ping Zhou
dc.contributor.authorXiong Wei
dc.contributor.authorChao Liu
dc.contributor.authorHao Cheng
dc.date.accessioned2022-01-30T21:48:16Z
dc.date.available2022-01-30T21:48:16Z
dc.date.issued12/1/2020 12:00:00 AM
dc.identifier.other%28ASCE%29GM.1943-5622.0001877.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl1/handle/yetl/4268867
dc.description.abstractThe fluctuation of reservoir water levels has significant impact on bank slope stability near a reservoir. Therefore, it is necessary to analyze the stability of bank slopes with reservoir drawdown. In this paper, a novel method combining the seepage force with rigorous limit equilibrium method is proposed to analyze the stability of bank slopes near the reservoir. First, the calculation method of the phreatic surface and the seepage force is developed. Then, six equilibrium equations are established based on the equilibrium conditions of three forces along the coordinate axis and the equilibrium conditions of three moments around the coordinate axes. Finally, a trust–region–reflective iterative algorithm is used to determine the safety factor of bank slopes from these six equations. Moreover, the effects of drawdown speed, the height of the drawdown, permeability coefficient, and the aquifer thickness on bank slope stability are investigated using the proposed method. Two engineering cases of Ataden I landslide and Guanyinping landslide are used to verify the correctness and practicability of the proposed method.
dc.publisherASCE
dc.titleThree-Dimensional Stability Analysis of Bank Slopes with Reservoir Drawdown Based on Rigorous Limit Equilibrium Method
dc.typeJournal Paper
dc.journal.volume20
dc.journal.issue12
dc.journal.titleInternational Journal of Geomechanics
dc.identifier.doi10.1061/(ASCE)GM.1943-5622.0001877
dc.page10
dc.treeInternational Journal of Geomechanics:;2020:;Volume ( 020 ):;issue: 012
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record