Show simple item record

dc.contributor.authorJun Zhu
dc.contributor.authorJianhui Deng
dc.contributor.authorFei Chen
dc.contributor.authorYiming Huang
dc.contributor.authorZhiqiu Yu
dc.date.accessioned2022-01-30T21:46:27Z
dc.date.available2022-01-30T21:46:27Z
dc.date.issued10/1/2020 12:00:00 AM
dc.identifier.other%28ASCE%29GM.1943-5622.0001825.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl1/handle/yetl/4268814
dc.description.abstractWater has a significant influence on rock mechanical and fracture behavior in geologic engineering. This study investigates the water weakening effects on mechanical properties, as well as the microscopic failure, of hard marble. Uniaxial compression tests, with the aid of a PCI-2 monitoring system to record acoustic emission (AE) data during the entire loading application, are carried out on dry and saturated rock specimens. The results of this study show that, as marble is saturated, its uniaxial compressive strength and elastic modulus both decrease, while the Poisson’s ratio increases. Compared with the dry marble, AE events of saturated marble are reduced, and its b-value is inclined to decrease intensively at the moment when stress drops for the first time. Using a new waveform-based AE analysis approach, two dominant frequency bands of AE waveforms are revealed, regardless of the effects of water. The percentage of low dominant frequency waveforms significantly increases and these waveforms become dominant, owing to the existence of water; this mainly results from pore water pressure.
dc.publisherASCE
dc.titleWater Saturation Effects on Mechanical and Fracture Behavior of Marble
dc.typeJournal Paper
dc.journal.volume20
dc.journal.issue10
dc.journal.titleInternational Journal of Geomechanics
dc.identifier.doi10.1061/(ASCE)GM.1943-5622.0001825
dc.page12
dc.treeInternational Journal of Geomechanics:;2020:;Volume ( 020 ):;issue: 010
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record