Show simple item record

dc.contributor.authorGang Zheng
dc.contributor.authorJun Pan
dc.contributor.authorYaoliang Li
dc.contributor.authorXuesong Cheng
dc.contributor.authorFulong Tan
dc.contributor.authorYiming Du
dc.contributor.authorXinhao Li
dc.date.accessioned2022-01-30T21:44:16Z
dc.date.available2022-01-30T21:44:16Z
dc.date.issued8/1/2020 12:00:00 AM
dc.identifier.other%28ASCE%29GM.1943-5622.0001766.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl1/handle/yetl/4268750
dc.description.abstractThe response of existing tunnels to adjacent excavation at an oblique intersection angle is still unclear. This study investigated the deformation of an existing tunnel when new excavation was conducted obliquely, based on a case history from Tianjin, China. In this project, a cutoff wall was installed to protect the tunnel from excessive horizontal movement. Finite element analyses were then performed to investigate the optimization of the cutoff wall design. The monitoring results show that due to the oblique intersection, the tunnel rings near the narrow and wide boundaries of the excavation ultimately exhibited heave and subsidence after excavation. The tunnel also underwent significant torsional deformation and horizontal displacement toward the excavation. The maximum horizontal displacement occurred at the tunnel ring closest to the midpoint of the wide boundary of the excavation. The numerical analyses show that as the intersection angle between the cutoff wall and the excavation increased, the efficiency of the cutoff wall first decreased and then increased. The effectiveness of the cutoff wall parallel to the tunnel was up to 122% greater than that of the wall parallel to the excavation, justifying the installation of cutoff walls parallel to tunnels.
dc.publisherASCE
dc.titleDeformation and Protection of Existing Tunnels at an Oblique Intersection Angle to an Excavation
dc.typeJournal Paper
dc.journal.volume20
dc.journal.issue8
dc.journal.titleInternational Journal of Geomechanics
dc.identifier.doi10.1061/(ASCE)GM.1943-5622.0001766
dc.page16
dc.treeInternational Journal of Geomechanics:;2020:;Volume ( 020 ):;issue: 008
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record