Show simple item record

dc.contributor.authorPeng Dong
dc.contributor.authorBangbiao Wu
dc.contributor.authorKaiwen Xia
dc.contributor.authorQizhi Wang
dc.date.accessioned2022-01-30T21:44:14Z
dc.date.available2022-01-30T21:44:14Z
dc.date.issued9/1/2020 12:00:00 AM
dc.identifier.other%28ASCE%29GM.1943-5622.0001765.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl1/handle/yetl/4268749
dc.description.abstractKnowledge of fracture process is critical for understanding rock failure mechanisms. In this study, the fracture behavior of single-flawed rock-like material plates made of mortar was investigated using a Split Hopkinson Pressure Bar (SHPB) system. The transient fracture process was recorded by an ultra-high-speed camera system in combination with the digital image correlation (DIC) method. The experimental result reveals that the dynamic strength is more sensitive to the loading rate for specimens with lower flaw angles. Through quantitative analysis of the displacement evolution along the fracture trajectory, four fracture modes were proposed: pure tensile mode (T-mode), pure shear mode (S-mode), tensile dominated mode (Ts-mode), and shear-dominated mode (St-mode). Moreover, it was recognized that the fracture mode is mainly controlled by the fracture angle. As the fracture angle increases, the shear component increases while the tension component diminishes. The results of this study can shed light on the fracture behavior of flawed rocks subjected to dynamic loading.
dc.publisherASCE
dc.titleFracture Modes of Single-Flawed Rock-Like Material Plates Subjected to Dynamic Compression
dc.typeJournal Paper
dc.journal.volume20
dc.journal.issue9
dc.journal.titleInternational Journal of Geomechanics
dc.identifier.doi10.1061/(ASCE)GM.1943-5622.0001765
dc.page13
dc.treeInternational Journal of Geomechanics:;2020:;Volume ( 020 ):;issue: 009
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record