Show simple item record

dc.contributor.authorB. R. Madhusudhan
dc.contributor.authorA. Boominathan
dc.contributor.authorS. Banerjee
dc.date.accessioned2022-01-30T21:44:06Z
dc.date.available2022-01-30T21:44:06Z
dc.date.issued9/1/2020 12:00:00 AM
dc.identifier.other%28ASCE%29GM.1943-5622.0001761.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl1/handle/yetl/4268745
dc.description.abstractThe dynamic properties of mixtures of poorly graded sand and the fine rubber tire chips are assessed under undrained, strain-controlled cyclic simple shear (CSS) conditions. In this study, CSS equipment with a confining pressure system is used. The CSS tests are performed on the mixtures with rubber content of 0%, 10%, 30%, 50%, and 100% by weight prepared at relative densities in the range of 65%–80%. Tests are carried out at high shear strain amplitudes in the range of 0.15%–3% at various total vertical stress levels (50–200 kPa). The material and loading parameters such as rubber content, shear strain, frequency, total vertical stress, influencing the dynamic properties and the pore pressure responses of the mixtures are investigated. It was found that the mixture with 10% rubber content has better dynamic properties than other mixtures. In addition, the pore pressure development can be retarded by the use of the sand–rubber tire chip mixtures.
dc.publisherASCE
dc.titleCyclic Simple Shear Response of Sand–Rubber Tire Chip Mixtures
dc.typeJournal Paper
dc.journal.volume20
dc.journal.issue9
dc.journal.titleInternational Journal of Geomechanics
dc.identifier.doi10.1061/(ASCE)GM.1943-5622.0001761
dc.page14
dc.treeInternational Journal of Geomechanics:;2020:;Volume ( 020 ):;issue: 009
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record