Show simple item record

dc.contributor.authorYuan Wei
dc.contributor.authorLi Zonghong
dc.contributor.authorNiu Jiandong
dc.contributor.authorWang Wei
dc.contributor.authorLi Jiaxin
dc.contributor.authorShang Weidong
dc.date.accessioned2022-01-30T21:42:29Z
dc.date.available2022-01-30T21:42:29Z
dc.date.issued7/1/2020 12:00:00 AM
dc.identifier.other%28ASCE%29GM.1943-5622.0001712.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl1/handle/yetl/4268702
dc.description.abstractThe limit equilibrium method (LEM) and the strength reduction method (SRM) are popular tools used for assessing the stability of slopes. However, they require complex numerical geomechanical models to be constructed and iterative computations to be performed. This study presents a rapid calculation method for the factor of safety of homogeneous and uniform slopes. First, the critical failure state curve is established to represent the relationship among all the parameters associated with slope stability, including the slope angle, slope height, unit weight, cohesion, and friction angle, when the slope is at the critical failure state. Second, based on the proposed critical failure state curve, an explicit expression is derived to directly provide the factor of safety for any homogeneous and uniform slope taking the soil Mohr–Coulomb parameters (i.e., cohesion and friction angle), unit weight, slope height, and slope angle as inputs. In contrast, once the soil's mechanical parameters are determined, for a given factor of safety, the slope height and angle may be calculated. Finally, the proposed method is applied to three cases to illustrate its applicability and validity. The results for all three cases show good agreement with those from the LEM software Slide 6.0.
dc.publisherASCE
dc.titleRapid Calculation Method for the Factor of Safety of a Uniform Slope
dc.typeJournal Paper
dc.journal.volume20
dc.journal.issue7
dc.journal.titleInternational Journal of Geomechanics
dc.identifier.doi10.1061/(ASCE)GM.1943-5622.0001712
dc.page6
dc.treeInternational Journal of Geomechanics:;2020:;Volume ( 020 ):;issue: 007
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record