Show simple item record

dc.contributor.authorSasanka Mouli Sravanam
dc.contributor.authorUmashankar Balunaini
dc.contributor.authorR. Madhav Madhira
dc.date.accessioned2022-01-30T21:42:27Z
dc.date.available2022-01-30T21:42:27Z
dc.date.issued7/1/2020 12:00:00 AM
dc.identifier.other%28ASCE%29GM.1943-5622.0001692.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl1/handle/yetl/4268701
dc.description.abstractBack-to-back mechanically stabilized earth (MSE) walls are commonly used in the construction of transportation infrastructure facilities. Federal Highway Administration (FHWA) guidelines discuss briefly the design of reinforced back-to-back walls. In this study, a numerical model was developed to study the behavior of connected and unconnected back-to-back walls under working stresses. The effect of reinforcement stiffness on tensile force profiles, the maximum tensile force developed in the reinforcement, and lateral pressures and lateral deformations for both unconnected and connected walls are discussed in detail. A well-defined critical slip surface was observed for the case of the unconnected back-to-back wall with relatively extensible reinforcement. Lateral pressures at the facing in both the cases were found to be almost equal, and the tensile forces developed in the reinforcement for the connected case were found to be uniform along the length of the reinforcement (except at higher depths).
dc.publisherASCE
dc.titleBehavior of Connected and Unconnected Back-to-Back Walls for Bridge Approaches
dc.typeJournal Paper
dc.journal.volume20
dc.journal.issue7
dc.journal.titleInternational Journal of Geomechanics
dc.identifier.doi10.1061/(ASCE)GM.1943-5622.0001692
dc.page10
dc.treeInternational Journal of Geomechanics:;2020:;Volume ( 020 ):;issue: 007
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record