Show simple item record

dc.contributor.authorShan Huang
dc.contributor.authorYongze Lu
dc.contributor.authorGuangcan Zhu
dc.contributor.authorYun Kong
dc.date.accessioned2022-01-30T21:34:37Z
dc.date.available2022-01-30T21:34:37Z
dc.date.issued8/1/2020 12:00:00 AM
dc.identifier.other%28ASCE%29EE.1943-7870.0001769.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl1/handle/yetl/4268462
dc.description.abstractAn innovative single-cathode three-anode microbial fuel cell (SCTA-MFC) was constructed, using sodium acetate as the anode organic substrate and nitrate as the cathode electron acceptor. It was found that in the case of a closed circuit with chemical oxygen demand (COD) in the cathode, higher maximum power density (PDM, 642.51  mW·m−3), COD, and nitrate removal efficiency (85.70%, 64.35%) could be obtained. The influence of initial organic concentration of the anode was investigated. When the concentration was about 600  mg·L−1, removal efficiency of COD was 87.20%, maximum coulombic efficiency (CEM) in the anode was 3.42%, PDM was 795.70  mW·m−3, and the nitrate removal efficiency and the CEM in the cathode were 75.52% and 99.50%, respectively. The presence of cathode organics can couple autotrophic and heterotrophic denitrification of SCTA-MFCs, and further enhance denitrification rates. An anode organic concentration of 600  mg·L−1 is beneficial to electricity generation of SCTA-MFCs.
dc.publisherASCE
dc.titleEffect of Organic Concentration in the Anode and Cathode on Bioelectricity Generation and Denitrification in a Single-Cathode Three-Anode Microbial Fuel Cell
dc.typeJournal Paper
dc.journal.volume146
dc.journal.issue8
dc.journal.titleJournal of Environmental Engineering
dc.identifier.doi10.1061/(ASCE)EE.1943-7870.0001769
dc.page8
dc.treeJournal of Environmental Engineering:;2020:;Volume ( 146 ):;issue: 008
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record