Show simple item record

dc.contributor.authorChu Ding
dc.contributor.authorShahabeddin Torabian
dc.contributor.authorBenjamin W. Schafer
dc.date.accessioned2022-01-30T21:09:38Z
dc.date.available2022-01-30T21:09:38Z
dc.date.issued12/1/2020 12:00:00 AM
dc.identifier.other%28ASCE%29ST.1943-541X.0002847.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl1/handle/yetl/4267748
dc.description.abstractThe objective of this work is to investigate the shear capacity of small end distance lap joints in sheet steel fastened with a single bolt. For bolted connections in shear, the current American Iron and Steel Institute (AISI) specification does not differentiate between tilting limit states, in which the fastener rotates and thin sheet curls, and nontilting limit states, such as bearing and tearing. An experimental program consisting of 36 bolted specimens with a small end distance, 18 subject to tilting and 18 not subject to tilting, were conducted to explore this phenomenon. The conducted tests were compared to available predictions in the design specifications and the literature. The comparison indicates that tilting needs to be explicitly considered in the tested condition. Recommendations are provided for design. There is a need for future work to investigate multibolt configurations with small end distance and connections with members.
dc.publisherASCE
dc.titleStrength of Bolted Lap Joints in Steel Sheets with Small End Distance
dc.typeJournal Paper
dc.journal.volume146
dc.journal.issue12
dc.journal.titleJournal of Structural Engineering
dc.identifier.doi10.1061/(ASCE)ST.1943-541X.0002847
dc.page13
dc.treeJournal of Structural Engineering:;2020:;Volume ( 146 ):;issue: 012
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record