Show simple item record

dc.contributor.authorHui Chen
dc.contributor.authorWei-Jian Yi
dc.contributor.authorZhongguo John Ma
dc.date.accessioned2022-01-30T21:08:23Z
dc.date.available2022-01-30T21:08:23Z
dc.date.issued11/1/2020 12:00:00 AM
dc.identifier.other%28ASCE%29ST.1943-541X.0002814.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl1/handle/yetl/4267715
dc.description.abstractBased on experimental results including the crack pattern and maximum applied strut stress, as well as on stress states obtained using a nonlinear finite-element analysis, it is identified that the typical critical shear crack of continuous deep beams is a web-shear crack, which has a large effect on shear-transfer mechanisms of deep beams. By theoretically considering the influence of the web-shear crack on the diagonal strut in a strut-and-tie model (STM) of continuous deep beams, a cracking strut-and-tie model (CSTM) has been developed. Shear-transfer mechanisms including aggregate interlock action, dowel action of longitudinal bars, and tension of web reinforcement are rationally considered. By comparing with a large database including 90 tests, the CSTM is verified to well predict the effect of main parameters including shear span-to-depth ratio, longitudinal reinforcement ratio, stirrup ratio, concrete compressive strength, and effective depth on the shear strength. Moreover, the proposed model is simplified to be used in the practical shear design, which shows a better prediction than the STM of a current standard.
dc.publisherASCE
dc.titleShear-Transfer Mechanisms and Strength Modeling of RC Continuous Deep Beams
dc.typeJournal Paper
dc.journal.volume146
dc.journal.issue11
dc.journal.titleJournal of Structural Engineering
dc.identifier.doi10.1061/(ASCE)ST.1943-541X.0002814
dc.page16
dc.treeJournal of Structural Engineering:;2020:;Volume ( 146 ):;issue: 011
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record