Show simple item record

dc.contributor.authorKaan Yıldız
dc.contributor.authorGeorge A. Lesieutre
dc.date.accessioned2022-01-30T21:08:09Z
dc.date.available2022-01-30T21:08:09Z
dc.date.issued11/1/2020 12:00:00 AM
dc.identifier.other%28ASCE%29ST.1943-541X.0002807.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl1/handle/yetl/4267708
dc.description.abstractIn this paper, general methods for the analysis of deployment of n-strut cylindrical Class-1 and Class-2 tensegrity booms are developed. Investigation of the geometries of cylindrical Class-1 and Class-2 tensegrity booms leads to comprehensive procedures for the deployment of cylindrical tensegrity booms with an arbitrary number (n) of struts in each stage. For Class-1 tensegrity booms, equilibrium surfaces that show the collection of feasible azimuth and declination angle pairs corresponding to self-equilibrated geometries are obtained numerically. Deployment is achieved by varying the azimuth and declination angle parameters while remaining on this equilibrium surface. For Class-2 tensegrity booms, two deployment strategies, one with constant-length reinforcing cables and another with actively controlled reinforcing cables, are considered, and deployment is achieved by varying the length of certain cables. Deployment is studied in detail for tensegrity booms with four struts in each stage and the results are presented. The developed generalization procedures for analyzing the geometry and deployment of n-strut cylindrical tensegrity booms make it possible to address design concerns such as packaging efficiency, stiffness, and stiffness-to-mass ratio.
dc.publisherASCE
dc.titleDeployment of n-Strut Cylindrical Tensegrity Booms
dc.typeJournal Paper
dc.journal.volume146
dc.journal.issue11
dc.journal.titleJournal of Structural Engineering
dc.identifier.doi10.1061/(ASCE)ST.1943-541X.0002807
dc.page13
dc.treeJournal of Structural Engineering:;2020:;Volume ( 146 ):;issue: 011
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record