Show simple item record

dc.contributor.authorMatthew R. Eatherton
dc.contributor.authorPatrick E. O’Brien
dc.contributor.authorW. Samuel Easterling
dc.date.accessioned2022-01-30T21:07:43Z
dc.date.available2022-01-30T21:07:43Z
dc.date.issued11/1/2020 12:00:00 AM
dc.identifier.other%28ASCE%29ST.1943-541X.0002797.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl1/handle/yetl/4267698
dc.description.abstractThis paper analyzes the ductility and overstrength of steel deck diaphragms and composite concrete on steel deck diaphragms and computes associated diaphragm design force-reduction factors, Rs. First, a database of past tests on steel deck and composite diaphragms was created, and more than 750 specimens were compiled into the database. A subset of 95 cantilever diaphragm specimens with postpeak inelastic behavior was identified for which specimen ductility and overstrength were calculated. The effects of variables such as fastener type, fastener spacing, and deck thickness on diaphragm ductility are explored. A method is then developed for converting cantilever diaphragm specimen ductility to diaphragm system-level ductility. Finally, diaphragm design force-reduction factors, Rs, are calculated consistent with an accepted methodology to be Rs=2.09, Rs=1.13, and Rs=2.36 for bare deck diaphragms with mechanical fasteners, bare deck diaphragms with welds to the supports, and concrete on steel deck diaphragms, respectively, for cyclically loaded specimens and assuming a long period structure.
dc.publisherASCE
dc.titleExamination of Ductility and Seismic Diaphragm Design Force-Reduction Factors for Steel Deck and Composite Diaphragms
dc.typeJournal Paper
dc.journal.volume146
dc.journal.issue11
dc.journal.titleJournal of Structural Engineering
dc.identifier.doi10.1061/(ASCE)ST.1943-541X.0002797
dc.page15
dc.treeJournal of Structural Engineering:;2020:;Volume ( 146 ):;issue: 011
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record