Show simple item record

dc.contributor.authorS. Lee
dc.contributor.authorS. Shin
dc.contributor.authorC. Lee
dc.date.accessioned2022-01-30T21:06:20Z
dc.date.available2022-01-30T21:06:20Z
dc.date.issued9/1/2020 12:00:00 AM
dc.identifier.other%28ASCE%29ST.1943-541X.0002765.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl1/handle/yetl/4267664
dc.description.abstractTwelve concrete prisms pretensioned with 2,400-MPa strands were fabricated to investigate the effects of initial prestress (fpi), concrete compressive strength at prestress release (fci′), and the spacing of the lateral confining reinforcement (S) on the transfer length. Test results showed that the transfer length increased with an increase in fpi and with decreases in fci′ and confinement level. A theoretical model incorporating rigid–linear local bond-slip relationships was developed and validated by its reasonable predictions of the distributions of the measured concrete strains in the transfer region. Based on the theoretical model, predictive formulas of transfer length were derived for both conventional and high-strength strands.
dc.publisherASCE
dc.titlePrediction of Transfer Lengths Inclusive of Conventional and High-Strength Strands
dc.typeJournal Paper
dc.journal.volume146
dc.journal.issue9
dc.journal.titleJournal of Structural Engineering
dc.identifier.doi10.1061/(ASCE)ST.1943-541X.0002765
dc.page10
dc.treeJournal of Structural Engineering:;2020:;Volume ( 146 ):;issue: 009
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record