Show simple item record

dc.contributor.authorChanchal Sonkar
dc.contributor.authorA. K. Mittal
dc.contributor.authorSriman Kr. Bhattacharyya
dc.date.accessioned2022-01-30T21:05:07Z
dc.date.available2022-01-30T21:05:07Z
dc.date.issued11/1/2020 12:00:00 AM
dc.identifier.other%28ASCE%29ST.1943-541X.0002723.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl1/handle/yetl/4267629
dc.description.abstractA comprehensive study has been carried out experimentally and analytically on the axial performance of sixteen (16 nos.) cold-formed steel (CFS) wall panels including one bare CFS wall frame, sheathed CFS walls, and single-column stud (with and without sheathing). In the present study, the effect of Magnesium Oxide (MgO) double-layer sheathing on the axial strength of CFS panels (if applied on one-side or both-sides), which has not been addressed before, is investigated in detail. The impacts of various parameters, such as screw spacing, joint detailing, and number of layer of sheathing on axial strength of CFS wall panels have been studied and some important conclusions are drawn. The experimental axial strength of single-stud and multiple-studs CFS wall panel (CFSWP) specimens have also been compared with analytically predicted values. Analytical modeling of CFSWP with MgO board sheathing is carried out by simulating the equivalent stud restraint provided by a screw-sheathing system by considering springs, as specified in some literatures. Thereafter, the constrained and unconstrained finite strip method (CUFSM) Tool version 4.05 is used to carry out an elastic buckling analysis of the stud with sheathing-based springs. Consecutively axial strength of CFSWP has been calculated using the direct strength method (DSM) as per AISI S100 (Appendix 1). The analytical results are found to be in agreement with the experimental results.
dc.publisherASCE
dc.titleComparative Study on Cold-Formed Steel Single-Stud and Multiple-Studs Wall Panels with Magnesium Oxide Sheathing under Axial Loading: Experimental and Analytical
dc.typeJournal Paper
dc.journal.volume146
dc.journal.issue11
dc.journal.titleJournal of Structural Engineering
dc.identifier.doi10.1061/(ASCE)ST.1943-541X.0002723
dc.page22
dc.treeJournal of Structural Engineering:;2020:;Volume ( 146 ):;issue: 011
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record