Show simple item record

dc.contributor.authorMahmudur Rahman
dc.contributor.authorYoshiaki Okui
dc.contributor.authorMasato Komuro
dc.contributor.authorMuhammad Atif Anwer
dc.contributor.authorAzusa Numata
dc.date.accessioned2022-01-30T21:04:59Z
dc.date.available2022-01-30T21:04:59Z
dc.date.issued9/1/2020 12:00:00 AM
dc.identifier.other%28ASCE%29ST.1943-541X.0002719.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl1/handle/yetl/4267625
dc.description.abstractThe strength of longitudinally continuous stiffened steel plates, exhibiting column-like behavior under uniaxial compression, was investigated at ultimate as well as serviceability limit states. Compressive strengths were determined from nonlinear elastoplastic FE analysis, where both material and geometric nonlinearity were taken into account. In the parametric analysis, the reduced slenderness parameter (RR) was varied from 0.4 to 1.4, and for each RR, thick plates and high-performance steels (SBHS) were considered along with thin plates and ordinary steels. The probabilistic distribution of the strengths was obtained through Monte Carlo simulation, in association with a response surface method. The response surface function comprises three independent variables, upon which the uncertainties in estimating the compressive strength of a certain stiffened plate depend, i.e., the residual stress, the initial out-of-plane whole-plate deflection, and the initial out-of-plane local deflection. Comparing the ultimate strength with a 5% non-exceedance probability indicates that the AASHTO, Canadian Code, and Japanese specification provides significantly conservative design, specifically for RR>0.8. Based on the obtained probabilistic information, partial safety factors for each RR were proposed, considering the mean value strengths as the nominal strengths, as an example.
dc.publisherASCE
dc.titleProbabilistic Compressive Strength of Stiffened Steel Plates Exhibiting Column-Like Behavior: Ultimate and Serviceability Limit States
dc.typeJournal Paper
dc.journal.volume146
dc.journal.issue9
dc.journal.titleJournal of Structural Engineering
dc.identifier.doi10.1061/(ASCE)ST.1943-541X.0002719
dc.page15
dc.treeJournal of Structural Engineering:;2020:;Volume ( 146 ):;issue: 009
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record