Show simple item record

dc.contributor.authorSivaganesh Selvaraj
dc.contributor.authorMahendrakumar Madhavan
dc.date.accessioned2022-01-30T21:04:42Z
dc.date.available2022-01-30T21:04:42Z
dc.date.issued10/1/2020 12:00:00 AM
dc.identifier.other%28ASCE%29ST.1943-541X.0002709.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl1/handle/yetl/4267615
dc.description.abstractThis paper investigates the bracing effect of sheathing fastener connection on point-symmetric shaped cold formed steel (CFS) studs through full-scale laboratory tests. The test parameters include slenderness of the CFS stud, fastener connection spacing, and sheathing thickness. The test results indicate that the bracing effect of the particle cement board has significantly enhanced the moment capacity of the CFS stud, nevertheless, this was not completely captured by the current design specifications of American Iron and Steel Institute (AISI). The detailed discussion on the unsuitability of the current AISI design method in determining the design moment capacity and failure modes of the sheathed CFS wall stud is presented. In addition, the PCB-fastener connection demand check shows that the provided sheathing configurations are adequate to brace the CFS studs from biaxial bending, which is in contrast compared to the experimental results. Therefore, a new test setup is proposed to accurately determine the stiffness of the sheathing fastener connections to formulate a reliable design method.
dc.publisherASCE
dc.titleInfluence of Sheathing-Fastener Connection Stiffness on the Design Strength of Cold-Formed Steel Wall Panels
dc.typeJournal Paper
dc.journal.volume146
dc.journal.issue10
dc.journal.titleJournal of Structural Engineering
dc.identifier.doi10.1061/(ASCE)ST.1943-541X.0002709
dc.page19
dc.treeJournal of Structural Engineering:;2020:;Volume ( 146 ):;issue: 010
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record