Show simple item record

dc.contributor.authorLizhong Wang
dc.contributor.authorMark D. Webster
dc.contributor.authorJerome F. Hajjar
dc.date.accessioned2022-01-30T21:03:53Z
dc.date.available2022-01-30T21:03:53Z
dc.date.issued8/1/2020 12:00:00 AM
dc.identifier.other%28ASCE%29ST.1943-541X.0002659.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl1/handle/yetl/4267591
dc.description.abstractThis paper presents the results of full-scale flexural testing of deconstructable composite beams that are part of a sustainable composite floor system. In this system, steel beams are attached with precast concrete planks utilizing deconstructable clamping connectors to achieve composite action as well as design for deconstruction. The beam specimens were designed with varied levels of composite action and demonstrated very ductile behavior. It is shown that the elastic stiffness of the beams can be conservatively estimated using a lower-bound moment of inertia, and the ultimate flexural strength of the beams closely matches the strength predicted by standard design provisions of the American Institute of Steel Construction (AISC). The AISC effective-width provisions can be utilized to calculate the effective widths of the deconstructable composite beams. Under moderate loading, the specimens behaved as composite beams with full interaction due to the friction generated at the steel–concrete interface.
dc.publisherASCE
dc.titleDesign for Deconstruction Using Sustainable Composite Beams with Precast Concrete Planks and Clamping Connectors
dc.typeJournal Paper
dc.journal.volume146
dc.journal.issue8
dc.journal.titleJournal of Structural Engineering
dc.identifier.doi10.1061/(ASCE)ST.1943-541X.0002659
dc.page15
dc.treeJournal of Structural Engineering:;2020:;Volume ( 146 ):;issue: 008
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record