Show simple item record

dc.contributor.authorJingjing Liu
dc.contributor.authorFrank Lam
dc.contributor.authorRicardo O. Foschi
dc.contributor.authorMinghao Li
dc.date.accessioned2022-01-30T20:10:01Z
dc.date.available2022-01-30T20:10:01Z
dc.date.issued2020
dc.identifier.other%28ASCE%29ST.1943-541X.0002589.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl1/handle/yetl/4266624
dc.description.abstractThis paper presents the modeling of coupling effect of tension and shear loading on cross-laminated timber (CLT) connections using a finite-element–based algorithm called HYST developed in 2000. The model idealizes the connections as a pseudonail–elastoplastic beam elements (the nail) surrounded by compression-only spring elements (steel sheath and wood embedment). A gap size factor and an unloading stiffness degradation index of the spring elements under cyclic loading were integrated into the optimized HYST algorithm to consider the coupling effect. The model was calibrated to compare with 32 configurations of CLT angle bracket and hold-down connections tests: in tension with coexistent constant shear force, and in shear with coexistent tension force. The results showed that the optimized model can fully capture the coupling effect of typical CLT connections, considering strength degradation, unloading and reloading stiffness degradation, and pinching effect. The model provided a useful tool for nail-based timber connections and a mechanism-based explanation to understand the hysteretic behavior of CLT connections under biaxial loading.
dc.publisherASCE
dc.titleModeling the Coupling Effect of CLT Connections under Biaxial Loading
dc.typeJournal Paper
dc.journal.volume146
dc.journal.issue4
dc.journal.titleJournal of Structural Engineering
dc.identifier.doi10.1061/(ASCE)ST.1943-541X.0002589
dc.page04020040
dc.treeJournal of Structural Engineering:;2020:;Volume ( 146 ):;issue: 004
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record