Show simple item record

dc.contributor.authorZhanke Liu
dc.date.accessioned2022-01-30T20:08:42Z
dc.date.available2022-01-30T20:08:42Z
dc.date.issued2020
dc.identifier.other%28ASCE%29ST.1943-541X.0002558.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl1/handle/yetl/4266591
dc.description.abstractThe equivalent moment concept for the in-plane strength problem of nonsway beam-columns is widely accepted, and the equivalent uniform moment factor is widely adopted by current design specifications, standards, or codes around the world. However, the equivalent moment concept and equivalent uniform moment factor fail to predict the maximum moment properly due to several conflicts in theoretical derivation, i.e., the term sec(kl/2) included in the amplification factor was treated by two different methods and the condition of the amplification factor was ignored. The direct determination method (DDM) for predicting the maximum moment of nonsway bean-columns subjected to end moments or eccentric loads is developed in this paper. The amplification factor provided by the elastic second-order analysis is rewritten as a new format with explicit physical significance. A simple condition for the maximum second-order moment occurs at the span of nonsway beam-columns is proposed. By employing the rewritten amplification factor and the new condition, the exact Cm factor is proposed and then simplified for providing a design approach. The proposed Cm factor is assessed by comparing with actual values of Cm. The results showed that the conflicts that existed in the equivalent moment concept are well resolved by the DDM, and the proposed Cm factor is more accurate than those in the literature or adopted in the current design specifications, standards, or codes.
dc.publisherASCE
dc.titleDirect Determination Method for In-Plane Strength of Nonsway Beam-Columns Subjected to End Moments or Eccentric Loads
dc.typeJournal Paper
dc.journal.volume146
dc.journal.issue3
dc.journal.titleJournal of Structural Engineering
dc.identifier.doi10.1061/(ASCE)ST.1943-541X.0002558
dc.page04020011
dc.treeJournal of Structural Engineering:;2020:;Volume ( 146 ):;issue: 003
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record