| dc.contributor.author | Walid Tizani | |
| dc.contributor.author | Mohammed Mahmood | |
| dc.contributor.author | Dionysios Bournas | |
| dc.date.accessioned | 2022-01-30T20:08:39Z | |
| dc.date.available | 2022-01-30T20:08:39Z | |
| dc.date.issued | 2020 | |
| dc.identifier.other | %28ASCE%29ST.1943-541X.0002557.pdf | |
| dc.identifier.uri | http://yetl.yabesh.ir/yetl1/handle/yetl/4266589 | |
| dc.description.abstract | Previous research on blind-bolted connections to hollow columns have provided a wealth of experimental data but little information on parametric analytical models to guide their design. One of the connection components that requires further understanding is the column-face bending. This paper presents the results and evaluation of experimental tests and finite element analyses for the bending behavior of the column-face component. Tests were conducted on full-scale connections to investigate the effect of concrete type and strength on the component. The results demonstrated that concrete strength has a direct influence on component strength and stiffness. The increase in concrete strength correlated with a significant increase in component strength. The increase in component stiffness was less significant, and is found to be limited by the column slenderness ratio (width/thickness). Slenderness ratio limits were defined beyond which the increase in concrete strength has no effect on component stiffness. A formula for evaluating the confinement effect on the concrete infill is proposed. The strength and stiffness of the component were not affected when using self-compacting concrete, but the use of lightweight concrete reduced both strength and stiffness. The failure mode of the component is bolt anchorage failure followed by a complete yielding of the column face plate around the bolts. | |
| dc.publisher | ASCE | |
| dc.title | Effect of Concrete Infill and Slenderness on Column-Face Component in Anchored Blind-Bolt Connections | |
| dc.type | Journal Paper | |
| dc.journal.volume | 146 | |
| dc.journal.issue | 4 | |
| dc.journal.title | Journal of Structural Engineering | |
| dc.identifier.doi | 10.1061/(ASCE)ST.1943-541X.0002557 | |
| dc.page | 04020041 | |
| dc.tree | Journal of Structural Engineering:;2020:;Volume ( 146 ):;issue: 004 | |
| dc.contenttype | Fulltext | |