Show simple item record

dc.contributor.authorNima Talebian
dc.contributor.authorBenoit P. Gilbert
dc.contributor.authorCao Hung Pham
dc.contributor.authorRomain Chariere
dc.contributor.authorHassan Karampour
dc.date.accessioned2022-01-30T20:08:25Z
dc.date.available2022-01-30T20:08:25Z
dc.date.issued2020
dc.identifier.other%28ASCE%29ST.1943-541X.0002548.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl1/handle/yetl/4266580
dc.description.abstractThis paper first describes a finite element model using advanced analysis to determine the biaxial bending capacity of cold-formed steel storage rack upright sections. The model is found to accurately predict published experimental results with an average predicted to an experimental capacity ratio of 1.02. Second, the validated model is used to run parametric studies and analyze the biaxial response of slender, semicompact and compact unperforated storage rack upright cross sections. Analyses are run for local and distortional buckling failure modes only. Nine biaxial bending configurations are considered per cross section and buckling mode. Results show that a nonlinear interactive relationship typically governs the biaxial bending of the studied uprights. This relationship is discussed and analyzed for the different failure modes and cross-sectional slenderness. The results from the parametric studies are used to verify the accuracy of different forms of published direct strength method (DSM) equations. They consist of the classical DSM equations and the use of inelastic reserve capacity in the DSM with and without using an extended range of the cross-sectional slenderness. Results show that for all investigated buckling modes, the DSM results in better predictions when the inelastic reserve capacity is considered. The appropriate form of the DSM to predict the biaxial capacity of unperforated cold-formed steel storage rack uprights is discussed.
dc.publisherASCE
dc.titleParametric Studies and Design Rules for Local and Distortional Biaxial-Bending Capacity of Cold-Formed Steel Storage-Rack Uprights
dc.typeJournal Paper
dc.journal.volume146
dc.journal.issue3
dc.journal.titleJournal of Structural Engineering
dc.identifier.doi10.1061/(ASCE)ST.1943-541X.0002548
dc.page04020009
dc.treeJournal of Structural Engineering:;2020:;Volume ( 146 ):;issue: 003
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record