Show simple item record

dc.contributor.authorShih-Ho Chao
dc.contributor.authorChatchai Jiansinlapadamrong
dc.contributor.authorSanputt Simasathien
dc.contributor.authorTaichiro Okazaki
dc.date.accessioned2022-01-30T20:08:06Z
dc.date.available2022-01-30T20:08:06Z
dc.date.issued2020
dc.identifier.other%28ASCE%29ST.1943-541X.0002541.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl1/handle/yetl/4266571
dc.description.abstractThe US design code provisions for steel special truss moment frames (STMFs) were formulated based on research work carried out in the 1990s with double-angle sections as truss members. To provide the higher capacity needed for STMFs in high-seismic zones, stronger members using double channels are required. With much stronger sections than double-angle sections, the heavy welding near the plastic-hinging regions can induce unfavorable restraint. Engineers often remove the X-diagonal web members in the special segments to meet architectural requirements, which leads to multiple Vierendeel panels with one or two intermediate vertical members (IVMs) in the special segments (SS). Although IVMs can significantly increase the strength of the special segments, such overstrength is not considered in the current code provisions. These practical concerns were investigated by a series of component tests and tests on two full-scale STMF specimens. Current code provisions prescribe an equation to compute the expected vertical shear strength, Vne, of SS for designing all nonyielding members. However, the current Vne equation considerably overestimates the capacity of SS using heavy sections. A new Vne equation addressing this issue and including the contribution of IVMs is developed. Other recommended details for enhancing the seismic performance of STMFs and plastic-hinge models of chord members are also proposed.
dc.publisherASCE
dc.titleFull-Scale Testing and Design of Special Truss Moment Frames for High-Seismic Areas
dc.typeJournal Paper
dc.journal.volume146
dc.journal.issue3
dc.journal.titleJournal of Structural Engineering
dc.identifier.doi10.1061/(ASCE)ST.1943-541X.0002541
dc.page04019229
dc.treeJournal of Structural Engineering:;2020:;Volume ( 146 ):;issue: 003
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record