• Login
    View Item 
    •   DSpace Home
    • ASCE
    • Journal of Structural Engineering
    • View Item
    •   DSpace Home
    • ASCE
    • Journal of Structural Engineering
    • View Item
    JavaScript is disabled for your browser. Some features of this site may not work without it.

    Fatigue Behavior of Integral Built-Up Box Y-Joints between Concrete-Filled Chords with Perfobond Ribs and Hollow Braces

    Thumbnail
    View/Open
    %28ASCE%29ST.1943-541X.0002491.pdf (3.409Mb)
    Date
    2020
    Author
    Lei Jiang
    Yongjian Liu
    Amir Fam
    Bin Liu
    Xin Long
    Metadata
    Show full item record
    Abstract
    A novel integral built-up box Y-joint welded to rectangular hollow section braces and concrete-filled square hollow section chord stiffened by perfobond ribs was proposed and studied in fatigue. Eight specimens, including one control with a hollow chord, were tested under axial loadings in the brace. Static tests initially were conducted to estimate the hot-spot stresses in the brace–chord weld intersection and at the arc transition point of the gusset plate. Stress concentration factors (SCFs) were compared with those of the hollow chord specimen to assess the influence of concrete fill and perfobond ribs. Fatigue tests then were carried out to failure under cyclic tension force in the brace. Crack initiation locations, crack propagations, failure modes, and the corresponding fatigue data were recorded. Using test results, the design Sr,hot-Nf curve for the proposed joint based on hot-spot stress method was established, adopting the least-squares method considering a 95th percentile. The Sr,hot-Nf curves of the proposed joint and conventional welded joints without gusset plate were compared for both square and circular braces connected to square chords. Additionally, the Sr,hot-Nf curves were compared with those in available design guides. It was shown for the proposed joint that SCFs are significantly lower than for joints with hollow chords and its fatigue strength is much higher than other conventional joints. One design guide Sr,hot-Nf curve was shown to overestimate the fatigue strength of the proposed joint; however, curves from other design guides underestimated its fatigue strength.
    URI
    http://yetl.yabesh.ir/yetl1/handle/yetl/4266520
    Collections
    • Journal of Structural Engineering

    DSpace software copyright © 2002-2015  DuraSpace
    Contact Us | Send Feedback
    Theme by 
    @mire NV
     

     

    Browse

    All of DSpaceCommunities & CollectionsBy Issue DateAuthorsTitlesSubjectsThis CollectionBy Issue DateAuthorsTitlesSubjects

    My Account

    LoginRegister

    Statistics

    View Usage Statistics

    DSpace software copyright © 2002-2015  DuraSpace
    Contact Us | Send Feedback
    Theme by 
    @mire NV