Show simple item record

dc.contributor.authorRinchen Rinchen
dc.contributor.authorKim J. R. Rasmussen
dc.date.accessioned2022-01-30T20:05:56Z
dc.date.available2022-01-30T20:05:56Z
dc.date.issued2020
dc.identifier.other%28ASCE%29ST.1943-541X.0002487.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl1/handle/yetl/4266514
dc.description.abstractThis paper presents a series of full-scale tests on long-span cold-formed steel single C-section portal frames subjected to gravity load and combined gravity and lateral load. The tests were carried out with the objectives of observing the structural performance of an existing portal frame configuration, determining the ultimate strength of the existing and modified portal frame configurations, and validating the structural behavior simulated by numerical models. The tests on cold-formed steel single C-section portal frames demonstrated that the flexural-torsional buckling of columns was the dominant structural behavior. The ultimate failure deformations were concentrated at the eaves and the apex and were governed by the type of fasteners used for the connections of column lips to the connection brackets. The strengths of the frames with modified joint configuration were slightly higher than those of the frames with the existing proprietary joint configuration. The ultimate loads obtained from the tests are compared with ultimate loads predicted by the Direct Strength Method. A method for including the bimoment in the design of CFS portal frames is highlighted.
dc.publisherASCE
dc.titleExperiments on Long-Span Cold-Formed Steel Single C-Section Portal Frames
dc.typeJournal Paper
dc.journal.volume146
dc.journal.issue1
dc.journal.titleJournal of Structural Engineering
dc.identifier.doi10.1061/(ASCE)ST.1943-541X.0002487
dc.page04019187
dc.treeJournal of Structural Engineering:;2020:;Volume ( 146 ):;issue: 001
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record