Show simple item record

dc.contributor.authorChul-Goo Kim
dc.contributor.authorHong-Gun Park
dc.contributor.authorTae-Sung Eom
dc.date.accessioned2022-01-30T20:05:52Z
dc.date.available2022-01-30T20:05:52Z
dc.date.issued2020
dc.identifier.other%28ASCE%29ST.1943-541X.0002483.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl1/handle/yetl/4266512
dc.description.abstractThe seismic performance of exterior beam-column joints in low-rise buildings with limited ductility details was investigated. Seven exterior beam-column connection specimens were prepared for cyclic loading tests, and the major test parameters were the column depth and joint shear reinforcement details. In the specimens, joint shear failure occurred before beam or column yielding. The shear strength of the exterior joints increased as the column depth (i.e., joint depth) and the area of shear reinforcements increased. Despite the nonseismic reinforcement details, U-shaped bars and 90°-hooked hoops with a spacing of one-third of the column depth increased the joint shear strength. As a result, flexural beam yielding occurred in several specimens. The joint shear strengths were compared with the predictions by current design codes, and the effects of the test parameters were investigated. Based on the results, a shear strength equation for exterior joints was proposed that is applicable to nonseismic details.
dc.publisherASCE
dc.titleShear Strength of Exterior Beam-Column Joints with Limited Ductility Details
dc.typeJournal Paper
dc.journal.volume146
dc.journal.issue2
dc.journal.titleJournal of Structural Engineering
dc.identifier.doi10.1061/(ASCE)ST.1943-541X.0002483
dc.page04019204
dc.treeJournal of Structural Engineering:;2020:;Volume ( 146 ):;issue: 002
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record