Show simple item record

dc.contributor.authorErmes Rizzi
dc.contributor.authorIvan Giongo
dc.contributor.authorJason M. Ingham
dc.contributor.authorDmytro Dizhur
dc.date.accessioned2022-01-30T20:05:45Z
dc.date.available2022-01-30T20:05:45Z
dc.date.issued2020
dc.identifier.other%28ASCE%29ST.1943-541X.0002473.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl1/handle/yetl/4266507
dc.description.abstractAn in-situ experimental campaign investigating the in-plane behavior of retrofitted timber floor diaphragms was undertaken on full-scale specimens located in a two-story clay brick unreinforced masonry building constructed circa 1913. The diaphragm retrofit strategies included renailing of board-to-joist connections, use of a fire-rated ceiling, use of steel chords, and the application of a plywood sheet overlay. When compared with as-built single straight-sheathed diaphragms, all tested solutions provided significant stiffening of the in-plane diaphragm response, with the sole exception being the configuration incorporating steel chords, where the chord influence was observed to be negligible. The fire-rated ceiling showed noticeable strength degradation due to cyclic loading while the plywood sheet overlay exhibited no strength loss between cycles to the same deformation levels, demonstrating the ability of the plywood-overlaid diaphragm to resist multicyclic loading. The subsequent phase of the study included comprehensive numerical modeling of the adopted retrofit strategies and their validation against the attained experimental results. A detailed parametric study on retrofitted timber floor diaphragms was also undertaken and is reported herein. These numerical investigations allowed evaluation of the most efficient overlay pattern, and also allowed the influence of aspects such as the plywood thickness and connection properties to be considered.
dc.publisherASCE
dc.titleTesting and Modeling In-Plane Behavior of Retrofitted Timber Diaphragms
dc.typeJournal Paper
dc.journal.volume146
dc.journal.issue2
dc.journal.titleJournal of Structural Engineering
dc.identifier.doi10.1061/(ASCE)ST.1943-541X.0002473
dc.page04019191
dc.treeJournal of Structural Engineering:;2020:;Volume ( 146 ):;issue: 002
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record