Show simple item record

dc.contributor.authorAlexander Beck
dc.contributor.authorNicola Gehri
dc.contributor.authorJaime Mata-Falcón
dc.contributor.authorWalter Kaufmann
dc.date.accessioned2022-01-30T20:05:27Z
dc.date.available2022-01-30T20:05:27Z
dc.date.issued2020
dc.identifier.other%28ASCE%29ST.1943-541X.0002461.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl1/handle/yetl/4266499
dc.description.abstractThe cracked membrane model with fixed, interlocked cracks (CMM-F), whose basic concepts were already outlined in this journal more than 20 years ago, is the most general approach for cracked reinforced concrete members subjected to in-plane stresses as long as one set of uniformly spaced cracks is considered and steel and bond stresses are modeled by equivalent, uniformly distributed stresses. However, the CMM-F was not implemented so far, due to the numerical intricacy of the general solution procedure. In this paper, these issues are overcome by determining the variation of steel and concrete stresses and strains between cracks using the tension chord model (TCM), rather than by iteratively integrating over a crack element. After a discussion of the compression field approaches, the TCM and the CMM-F, including the constitutive relationships of concrete and reinforcement and aggregate-interlock models, response predictions obtained from the CMM-F are validated against experimental data. While the agreement is generally good, the predicted stresses at the cracks and the crack kinematics differ significantly between the different aggregate-interlock relationships. These values should be measured in future experiments, using appropriate instrumentation, to validate the aggregate-interlock models.
dc.publisherASCE
dc.titleCracked Membrane Model with Fixed, Interlocked Cracks: Numerical Implementation and Validation
dc.typeJournal Paper
dc.journal.volume146
dc.journal.issue2
dc.journal.titleJournal of Structural Engineering
dc.identifier.doi10.1061/(ASCE)ST.1943-541X.0002461
dc.page04019193
dc.treeJournal of Structural Engineering:;2020:;Volume ( 146 ):;issue: 002
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record