Show simple item record

dc.contributor.authorHongmei Zhang
dc.contributor.authorYing Zhang
dc.contributor.authorXilin Lu
dc.contributor.authorYuanfeng Duan
dc.contributor.authorHanshu Zhang
dc.date.accessioned2022-01-30T20:05:20Z
dc.date.available2022-01-30T20:05:20Z
dc.date.issued2020
dc.identifier.other%28ASCE%29ST.1943-541X.0002444.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl1/handle/yetl/4266494
dc.description.abstractThe seismic behavior of shear walls is significantly influenced by the axial load ratio (ALR), and a maximum ALR limit is generally specified by current seismic design code. To achieve improved performance under a high axial load ratio, steel fiber–reinforced concrete (SFRC) composite shear walls with improved lateral bearing and deformation capacity under high ALRs were developed in this work. Owing to their excellent seismic performance, SFRC composite shear walls are recommended for use in earthquake-prone regions. However, current specifications of ALR may lead to considerable material waste associated with SFRC composite shear walls. To evaluate the influence of different ALRs on seismic performance, three SFRC composite shear walls (ALR=0.36–0.68) were designed for testing under quasi-static cyclically increasing lateral loads and a constant vertical load until failure. The results revealed that the SFRC composite shear wall exhibits good seismic performance under high ALR. In addition, (1) the bearing capacity increased significantly and rigidity degradation was gradual; (2) the proportion of shear deformation increased; and (3) the development of bottom curvature decreased with increasing ALR. Furthermore, the applicability of the current code to the ultimate lateral bearing capacity is discussed.
dc.publisherASCE
dc.titleInfluence of Axial Load Ratio on the Seismic Behavior of Steel Fiber–Reinforced Concrete Composite Shear Walls
dc.typeJournal Paper
dc.journal.volume146
dc.journal.issue1
dc.journal.titleJournal of Structural Engineering
dc.identifier.doi10.1061/(ASCE)ST.1943-541X.0002444
dc.page04019171
dc.treeJournal of Structural Engineering:;2020:;Volume ( 146 ):;issue: 001
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record