Show simple item record

dc.contributor.authorLei Zhang
dc.contributor.authorT. Matthew Evans
dc.date.accessioned2022-01-30T19:39:31Z
dc.date.available2022-01-30T19:39:31Z
dc.date.issued2020
dc.identifier.other%28ASCE%29GM.1943-5622.0001720.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl1/handle/yetl/4265741
dc.description.abstractPrior laboratory and in situ investigations show that monotonic preshearing can have a significant effect on the cyclic response of granular materials. The underlying mechanics that are responsible for these changes in behavior in response to preshearing are not well characterized, however. Herein, we use the discrete-element method (DEM) to simulate undrained monotonic and cyclic simple shear tests with the constant volume method. Through published comparisons to laboratory data, DEM simulations have been shown to reasonably predict the cyclic response of granular materials, making them an appropriate tool for studying the effects of initial static shear stress on liquefaction initiation. Mechanical coordination number and the normal force-weighted fabric tensor are used to describe the evolution of fabric after monotonic preshearing and during cyclic loading. We find that higher initial static shear stress induces smaller cyclic strength in stress-controlled cyclic simple shear tests, but that there is no such effect in strain-controlled cyclic simple shear tests in which the normal force-weighted anisotropy is removed in the first three loading cycles. In addition, the stability of specimens is found to be closely related to pore-pressure increases. Finally, we show that the effect of initial static shear stress on liquefaction resistance is a combination of reduced stability before cyclic loading and accumulated shear strain during cyclic loading.
dc.publisherASCE
dc.titleInvestigation of Initial Static Shear Stress Effects on Liquefaction Resistance Using Discrete Element Method Simulations
dc.typeJournal Paper
dc.journal.volume20
dc.journal.issue7
dc.journal.titleInternational Journal of Geomechanics
dc.identifier.doi10.1061/(ASCE)GM.1943-5622.0001720
dc.page04020087
dc.treeInternational Journal of Geomechanics:;2020:;Volume ( 020 ):;issue: 007
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record