Show simple item record

dc.contributor.authorQian-Feng Gao
dc.contributor.authorMohamad Jrad
dc.contributor.authorMahdia Hattab
dc.contributor.authorJean-Marie Fleureau
dc.contributor.authorLamine Ighil Ameur
dc.date.accessioned2022-01-30T19:38:36Z
dc.date.available2022-01-30T19:38:36Z
dc.date.issued2020
dc.identifier.other%28ASCE%29GM.1943-5622.0001682.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl1/handle/yetl/4265707
dc.description.abstractThis work aims to investigate the micropore properties of saturated kaolin subjected to triaxial loading. Consolidated drained triaxial compression tests were conducted on both normally consolidated and overconsolidated clay specimens. In the (p′, q) plane, a given stress level was reached by following two different stress paths (i.e., the purely deviatoric stress path and the conventional constant σ′3 stress path). This approach allows observing the influence of stress path on the evolution of pore structure. The experimental approach consisted in using scanning electron microscopy (SEM) and mercury intrusion porosimetry (MIP) to quantify the micropore structure of the specimens after being submitted to mechanical loading. The results clearly show that the micropore structure of clay was affected by the loading conditions. Consequently, the development of induced anisotropy appeared as mainly related to the variation of pore shape and pore orientation. Meanwhile, for overconsolidated specimens featuring dilative behavior, the pores exhibited a trend to be more open (i.e., rounder) and more randomly oriented compared with the normally consolidated specimens showing contractive behavior. Even if the micropore structures deduced from the SEM-based method, on the one hand, and from MIP tests, on the other hand, concern different scales of pores, the analysis shows that both methods of investigation were quite well comparable and revealed similar variation tendencies in void ratio and pore size distribution.
dc.publisherASCE
dc.titlePore Morphology, Porosity, and Pore Size Distribution in Kaolinitic Remolded Clays under Triaxial Loading
dc.typeJournal Paper
dc.journal.volume20
dc.journal.issue6
dc.journal.titleInternational Journal of Geomechanics
dc.identifier.doi10.1061/(ASCE)GM.1943-5622.0001682
dc.page04020057
dc.treeInternational Journal of Geomechanics:;2020:;Volume ( 020 ):;issue: 006
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record