Show simple item record

dc.contributor.authorP. Subramaniam
dc.contributor.authorSubhadeep Banerjee
dc.date.accessioned2022-01-30T19:38:22Z
dc.date.available2022-01-30T19:38:22Z
dc.date.issued2020
dc.identifier.other%28ASCE%29GM.1943-5622.0001673.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl1/handle/yetl/4265699
dc.description.abstractDeep cement mixing and jet grouting is a widely adopted ground improvement method to solidify soft sediments. Several reports are available on the static strength and maximum shear modulus of cement-treated ground. This paper discusses the variation of shear modulus and damping ratio of cement-treated marine clay at various shear strain amplitudes. A series of resonant column tests and cyclic triaxial experiments are conducted to study the effects of effective confining pressure, curing stress, cement content, initial clay water content, and curing time on the shear modulus reduction and damping ratio of cement-treated marine clay. Results show that the maximum shear modulus increases by 88%, 131%, and 282% for clays treated with cement contents of 5%, 7.5%, and 10%, respectively, for 100 kPa confining pressure. For clay treated with 5% cement content and cured under 30 kPa stress, at a very small strain level, the shear modulus increases by about 37%, while the confining pressure increases from 100 to 200 kPa. However, the increase in shear modulus reduces to 7% for specimens cured under 90 kPa stress. However, the increase in shear modulus is more prominent at a smaller range of shear strains (<0.01%). Similarly, at 1% shear strain amplitude, samples cured for 28 days show 33% higher shear modulus than samples cured for 7 days. Conversely, the variation of the damping ratio with these factors seems negligible, especially at the small shear strain regime (<0.1%).
dc.publisherASCE
dc.titleDynamic Properties of Cement-Treated Marine Clay
dc.typeJournal Paper
dc.journal.volume20
dc.journal.issue6
dc.journal.titleInternational Journal of Geomechanics
dc.identifier.doi10.1061/(ASCE)GM.1943-5622.0001673
dc.page04020065
dc.treeInternational Journal of Geomechanics:;2020:;Volume ( 020 ):;issue: 006
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record