Show simple item record

dc.contributor.authorT. L. Han
dc.contributor.authorJ. P. Shi
dc.contributor.authorY. S. Chen
dc.contributor.authorX. S. Cao
dc.date.accessioned2022-01-30T19:37:40Z
dc.date.available2022-01-30T19:37:40Z
dc.date.issued2020
dc.identifier.other%28ASCE%29GM.1943-5622.0001642.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl1/handle/yetl/4265673
dc.description.abstractThe safety and durability of rock mass engineering face rigorous testing in cold regions, prompting experimental study of the effect of chemical corrosion and freeze–thaw (F–T) cycles. By taking the actual environment of the joint rock in the hydro-fluctuation belt of a typical bank slope in the Three Gorges Reservoir region of China as an example, the interactive relationship between chemical corrosion and F–T cycles is studied. An F–T cycle test scheme is adopted to explore the F–T degradation of mechanical properties and the damage degradation mechanism of mode-I fracture sandstone immersed in different chemical solutions. Experimental results show that there is significant F–T damage that deteriorates mechanical properties under different chemical corrosion attacks but that peak strain and yield properties of the specimen increase. In the first 0–20 F–T cycles, the deterioration of the mechanical properties of sandstone immersed in the alkaline Na2SO4 (pH = 12.0) solutions is the smallest; that in the acid Na2SO4 (pH = 3.0) solutions is the greatest. With the increasing number of F–T cycles, the F–T degradation degree of the mechanical properties in Na2SO4 (pH = 12.0) solutions gradually increase, but that is still smaller than that in the acid Na2SO4 (pH = 3.0) solutions, and is relatively great compared with that in neutral solutions. The damage to the microstructure inside sandstone gradually increases with repeated F–T cycles; the edges and corners of the mineral grains gradually disappear or become smoother. In addition, the roughness of the mineral grains gradually decreases, eliciting a looser structure. Statistical analysis reveals an obvious relationship between the damage degree of mechanical parameters and ion concentration in chemical solutions, with higher ion concentrations leading to greater deterioration degrees of physical and mechanical parameters. Correlations among physical and mechanical properties of specimens, F–T damage variable degree, and ion concentration are obtained.
dc.publisherASCE
dc.titleSalt Solution Attack–Induced Freeze–Thaw Mechanical Degradation and Its Correlation with Strength Characteristic of Mode-I Fracture Sandstone
dc.typeJournal Paper
dc.journal.volume20
dc.journal.issue5
dc.journal.titleInternational Journal of Geomechanics
dc.identifier.doi10.1061/(ASCE)GM.1943-5622.0001642
dc.page04020039
dc.treeInternational Journal of Geomechanics:;2020:;Volume ( 020 ):;issue: 005
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record