• Login
    View Item 
    •   DSpace Home
    • ASCE
    • International Journal of Geomechanics
    • View Item
    •   DSpace Home
    • ASCE
    • International Journal of Geomechanics
    • View Item
    JavaScript is disabled for your browser. Some features of this site may not work without it.

    Shape Characterization of Fragmented Sand Grains via X-Ray Computed Tomography Imaging

    Thumbnail
    View/Open
    %28ASCE%29GM.1943-5622.0001599.pdf (4.155Mb)
    Date
    2020
    Author
    Wenbo Zheng
    Xinli Hu
    Dwayne D. Tannant
    Metadata
    Show full item record
    Abstract
    The mechanical and hydraulic properties of granular materials are fundamentally affected by the grain size and shape. Three samples of uniformly graded quartz sand with different size ranges were subjected to one-dimensional compression tests up to 40 MPa to fracture the sand into fragments with a variety of sizes and shapes. X-ray computed tomography was used to obtain the morphology of the crushed sand at a resolution of 2.8 μm. A practical divide and stitch method was proposed and implemented to automatically separate and extract individual grains for morphological analysis. This method can reduce the misidentification of grains and voids. Scans of 5,481 grains were used to quantify the three-dimensional morphological properties of grains of different sizes and shapes. The shape descriptors of elongation, flatness, and sphericity were the best way to describe the grain shape. The intermediate Feret diameter was the best parameter for characterizing the grain size. The smaller fragments from the crushed sand were more elongated and had higher flatness and convexity. The distributions of elongation, flatness, sphericity, and convexity for grains in different size ranges followed a normal distribution. The standard deviation in the grain shape descriptors increased for the small grain sizes. The volume and surface area of the grains can be predicted with high confidence using elongation, flatness, and intermediate Feret diameter. Convexity needs to be used along with elongation and flatness to estimate sphericity reliably.
    URI
    http://yetl.yabesh.ir/yetl1/handle/yetl/4265637
    Collections
    • International Journal of Geomechanics

    DSpace software copyright © 2002-2015  DuraSpace
    Contact Us | Send Feedback
    Theme by 
    @mire NV
     

     

    Browse

    All of DSpaceCommunities & CollectionsBy Issue DateAuthorsTitlesSubjectsThis CollectionBy Issue DateAuthorsTitlesSubjects

    My Account

    LoginRegister

    Statistics

    View Usage Statistics

    DSpace software copyright © 2002-2015  DuraSpace
    Contact Us | Send Feedback
    Theme by 
    @mire NV