Show simple item record

dc.contributor.authorGuojun Wu
dc.contributor.authorWeizhong Chen
dc.contributor.authorXianjun Tan
dc.contributor.authorWusheng Zhao
dc.contributor.authorShanpo Jia
dc.contributor.authorHongming Tian
dc.contributor.authorJianping Yang
dc.date.accessioned2022-01-30T19:34:52Z
dc.date.available2022-01-30T19:34:52Z
dc.date.issued2020
dc.identifier.other%28ASCE%29GM.1943-5622.0001543.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl1/handle/yetl/4265584
dc.description.abstractFor tunneling in squeezing rock, large deformation induced by tunnel excavation and creep of squeezing rock has been a great challenge during construction. This large deformation would keep growing for a long time, significantly threatening the stability of the tunnel. In this study, a new foamed concrete is introduced. Relative to conventional foamed concrete, the new foamed concrete has the characteristics of good ductility (it maintains its integrity and is not easy to crack), high compressive strength (the uniaxial compressive strength is 3.12 MPa, whereas for the conventional concrete it is about 0.9 MPa), and tight adhesion with cement concrete (proven by shear strength at interface between the foamed concrete and the cement concrete) as shown by laboratory tests. To evaluate its performance as a cushion material in the yielding support for a tunnel, the foamed concrete was applied in a yielding support for a deep-buried tunnel in squeezing rock by numerical simulation. Compared with the results of the stiff support, the contact and shear stress at the interface between the cushion layer and the second lining are very small, resulting from the capacity of the foamed concrete to endure great loads and absorb energies from the creep of surrounding rock, thereby improving the stress state of the second lining and reducing the deformation of the second lining.
dc.publisherASCE
dc.titlePerformance of New Type of Foamed Concrete in Supporting Tunnel in Squeezing Rock
dc.typeJournal Paper
dc.journal.volume20
dc.journal.issue2
dc.journal.titleInternational Journal of Geomechanics
dc.identifier.doi10.1061/(ASCE)GM.1943-5622.0001543
dc.page04019173
dc.treeInternational Journal of Geomechanics:;2020:;Volume ( 020 ):;issue: 002
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record