Show simple item record

dc.contributor.authorMinghui Yang
dc.contributor.authorZhicheng Ai
dc.contributor.authorBo Deng
dc.date.accessioned2022-01-30T19:34:37Z
dc.date.available2022-01-30T19:34:37Z
dc.date.issued2020
dc.identifier.other%28ASCE%29GM.1943-5622.0001528.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl1/handle/yetl/4265574
dc.description.abstractThe aim of this study is to investigate the uplift behavior of horizontal strip plate anchors constructed at a distance to the slope crest. A series of uplift load tests was conducted in laboratory for scaled strip plate anchor models, which were buried in the horizontal ground or at different distances from a sand slope with various slope angles. Results imply that the distance from the anchor to the slope and the angle of the slope play an influential role in the failure mode and loading capacity. The loading mechanism of the strip plate anchor buried near a slope is equivalent to that of a strip plate anchor buried in horizontal ground when the edge-distance ratio reaches a critical value. The critical edge-distance ratio obtained by the proposed formula in this study is 0.9 or 1.9 for slope angles of 15° or 30°, respectively. Further, the geometric configuration of the failure surfaces can be approximated to be circular curves whose radius can be determined by the value of edge-distance ratio and slope angle. After that, an analytical method to calculate the uplift capacity considering the influence of edge-distance ratio and slope angle has been developed by using the limit-equilibrium method. All the error between the calculated results based on the theoretical solutions and the measurements from the laboratory tests is contained in 17.4% when the effect of sand dilatancy is considered.
dc.publisherASCE
dc.titleExperimental and Analytical Study on Uplift Loading Capacity of Strip Plate Anchors Near Sand Slope
dc.typeJournal Paper
dc.journal.volume20
dc.journal.issue1
dc.journal.titleInternational Journal of Geomechanics
dc.identifier.doi10.1061/(ASCE)GM.1943-5622.0001528
dc.page04019136
dc.treeInternational Journal of Geomechanics:;2020:;Volume ( 020 ):;issue: 001
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record