Show simple item record

dc.contributor.authorSabatino Cuomo
dc.contributor.authorPooyan Ghasemi
dc.contributor.authorMario Martinelli
dc.contributor.authorMichele Calvello
dc.date.accessioned2019-09-18T10:41:50Z
dc.date.available2019-09-18T10:41:50Z
dc.date.issued2019
dc.identifier.other%28ASCE%29GM.1943-5622.0001500.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl1/handle/yetl/4260401
dc.description.abstractFlowslides and retrogressive slope failures are usually triggered from a significant drop of shear strength in loose coarse-grained materials, including static liquefaction and successive large deformations. A 4-step procedure is proposed to model these phenomena using the material point method, together with an advanced constitutive model calibrated via inverse analysis. The numerical simulations are performed for a well-documented flume test, which showed that a flowslide was initiated by toe sliding followed by static liquefaction leading to retrogressive failure. First, an advanced hypoplastic constitutive model is calibrated to simulate the observed mechanical behavior of the representative elementary volume (REV) of soil in triaxial tests. Then, these model parameters are used to simulate the slope instability process observed in the flume test. The simulation of triaxial tests and slope instability are satisfactory and highlight important features about the evolution of pore-water pressure and effective stress in a large deformation slope process.
dc.publisherAmerican Society of Civil Engineers
dc.titleSimulation of Liquefaction and Retrogressive Slope Failure in Loose Coarse-Grained Material
dc.typeJournal Paper
dc.journal.volume19
dc.journal.issue10
dc.journal.titleInternational Journal of Geomechanics
dc.identifier.doi10.1061/(ASCE)GM.1943-5622.0001500
dc.page04019116
dc.treeInternational Journal of Geomechanics:;2019:;Volume ( 019 ):;issue: 010
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record