Show simple item record

dc.contributor.authorChen Hou
dc.contributor.authorWancheng Zhu
dc.contributor.authorBaoxu Yan
dc.contributor.authorKai Guan
dc.contributor.authorLeilei Niu
dc.date.accessioned2019-09-18T10:41:32Z
dc.date.available2019-09-18T10:41:32Z
dc.date.issued2019
dc.identifier.other%28ASCE%29GM.1943-5622.0001441.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl1/handle/yetl/4260339
dc.description.abstractMassive voids form in underground mines due to the continuous removal of valuable minerals. Backfill and pillars are commonly built into the voids to provide both local and regional support. The backfill material cannot rigidly support the upper load and acts as a secondary support system to the pillars. Confinement effect effectively enhances the strength of the pillar; however, the lateral stress mobilized within the fill is contingent upon deformation of the roof and pillars, which act as a passive support. Without large-scale volumetric compression, the backfill has no effect on the prepeak stage of the pillar. In this case, the friction resistance of the interface between the pillar and backfill plays a key role in increasing the load capacity of the support system. This paper presents an analytical solution based on the load transfer of friction force in the interface, which involves the shear behavior of the interface, the mechanical properties of the pillar, and the pillar dimensions. Experimental results showed that the bearing capacity of the support system was strongly dependent on the interface shear parameters, lateral stress, and fill ratio. Comparisons were made between the proposed solution and experimental results. The results may represent a workable understanding of the interaction mechanism between backfill and pillars and assist in the design and optimization of underground mine support systems.
dc.publisherAmerican Society of Civil Engineers
dc.titleAnalytical and Experimental Study of Cemented Backfill and Pillar Interactions
dc.typeJournal Paper
dc.journal.volume19
dc.journal.issue8
dc.journal.titleInternational Journal of Geomechanics
dc.identifier.doi10.1061/(ASCE)GM.1943-5622.0001441
dc.page04019080
dc.treeInternational Journal of Geomechanics:;2019:;Volume ( 019 ):;issue: 008
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record