Show simple item record

dc.contributor.authorEmad Ghazavi Baghini
dc.contributor.authorMohammad Mohsen Toufigh
dc.contributor.authorVahid Toufigh
dc.date.accessioned2019-09-18T10:41:31Z
dc.date.available2019-09-18T10:41:31Z
dc.date.issued2019
dc.identifier.other%28ASCE%29GM.1943-5622.0001439.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl1/handle/yetl/4260335
dc.description.abstractThe present paper is about the application of the disturbed-state concept (DSC) model and a mesh-free method called the natural-element method (NEM) for analyzing the dynamic response of pile foundations. In comparison to the finite-element method (FEM), mesh-free methods use higher-order approximate functions to find unknowns. According to the existing stress level, the DSC model divides the behavior of the materials into two states: a relatively intact (RI) state and a fully adjusted (FA) state. The behaviors of RI and FA states were characterized by the hierarchical single surface (HISS) plasticity model as the continuous yield surface and the critical-state concept, respectively. The natural-element procedure and DSC model were used to predict the field behavior of two instrumented piles embedded in saturated clay and dry sand subjected to cyclic axial loading. The predictions showed an appropriate correlation with field measurements and an improvement for the analysis results of the FEM with the DSC model involving softening behavior.
dc.publisherAmerican Society of Civil Engineers
dc.titleApplication of DSC Model for Natural-Element Analysis of Pile Foundations under Cyclic Loading
dc.typeJournal Paper
dc.journal.volume19
dc.journal.issue7
dc.journal.titleInternational Journal of Geomechanics
dc.identifier.doi10.1061/(ASCE)GM.1943-5622.0001439
dc.page04019066
dc.treeInternational Journal of Geomechanics:;2019:;Volume ( 019 ):;issue: 007
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record