Show simple item record

dc.contributor.authorMajid Yazdandoust
dc.date.accessioned2019-09-18T10:41:07Z
dc.date.available2019-09-18T10:41:07Z
dc.date.issued2019
dc.identifier.other%28ASCE%29GM.1943-5622.0001344.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl1/handle/yetl/4260255
dc.description.abstractPseudo-static analysis is one of the most common and simplest approaches used to assess the seismic stability of reinforced-soil retaining walls. Despite the importance of the equivalent seismic coefficient as the key parameter of the pseudo-static approach, no specified criterion has yet been provided for the selection of this coefficient. Therefore, in this study, an attempt was made to assess the horizontal seismic coefficient (kh) in three different types of reinforced soil structure based on the physical and analytical modeling. For this purpose, first, the values of yielding acceleration (ay), the axial force distribution along the reinforcements at the failure stage and the geometry of slip surfaces were determined in different conditions by the shaking table test. Then, by using the limit equilibrium horizontal slice method (HSM) and based on the results obtained from shaking table tests, the physical models were simulated to estimate the equivalent seismic coefficients needed to establish slip surfaces similar to those observed in the shaking table tests. Finally, according to the results obtained, the upper bound of the horizontal seismic coefficient for the steel-strip reinforced-soil wall (SSW), soil-nailed wall (SNW), and mechanically stabilized earth/soil nail hybrid retaining wall (HRW) were introduced as a function of peak ground acceleration (PGA) and was compared with existing design codes.
dc.publisherAmerican Society of Civil Engineers
dc.titleAssessment of Horizontal Seismic Coefficient for Three Different Types of Reinforced Soil Structure Using Physical and Analytical Modeling
dc.typeJournal Paper
dc.journal.volume19
dc.journal.issue7
dc.journal.titleInternational Journal of Geomechanics
dc.identifier.doi10.1061/(ASCE)GM.1943-5622.0001344
dc.page04019070
dc.treeInternational Journal of Geomechanics:;2019:;Volume ( 019 ):;issue: 007
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record