Show simple item record

dc.contributor.authorDario Coronelli
dc.contributor.authorRaoul François
dc.contributor.authorHiep Dang
dc.contributor.authorWenjun Zhu
dc.date.accessioned2019-09-18T10:38:00Z
dc.date.available2019-09-18T10:38:00Z
dc.date.issued2019
dc.identifier.other%28ASCE%29ST.1943-541X.0002358.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl1/handle/yetl/4259612
dc.description.abstractThe paper proposes strut and tie models for the flexure, shear, and bond strength of corroded reinforced concrete (RC) beams. The deterioration of the material properties including bond and the cross section losses are modeled. Generalized corrosion and pitting are considered. The models are verified with the experimental data of simply supported beams with transverse stirrups subjected to three- or four-point bending, which shows the reduced capacity and changes of failure modes caused by the deterioration. The main innovative contributions consist in a consideration of bond deterioration effects in strut and tie models of corroded beams with different shear span-to-depth ratios and the verification of the models by comparison with tests from different campaigns related in the literature that used either natural corrosion, environmental corrosion under load, or slow artificial corrosion. In addition, the fib Model Code 2010 provisions for bond and its deterioration due to low and medium corrosion levels are used and extended for higher corrosion levels; practical choices for cross section losses are defined.
dc.publisherAmerican Society of Civil Engineers
dc.titleStrength of Corroded RC Beams with Bond Deterioration
dc.typeJournal Paper
dc.journal.volume145
dc.journal.issue10
dc.journal.titleJournal of Structural Engineering
dc.identifier.doi10.1061/(ASCE)ST.1943-541X.0002358
dc.page04019097
dc.treeJournal of Structural Engineering:;2019:;Volume ( 145 ):;issue: 010
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record