Show simple item record

dc.contributor.authorJun Ye
dc.contributor.authorFrancisco J. Meza
dc.contributor.authorIman Hajirasouliha
dc.contributor.authorJurgen Becque
dc.contributor.authorPaul Shepherd
dc.contributor.authorKypros Pilakoutas
dc.date.accessioned2019-09-18T10:37:55Z
dc.date.available2019-09-18T10:37:55Z
dc.date.issued2019
dc.identifier.other%28ASCE%29ST.1943-541X.0002344.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl1/handle/yetl/4259596
dc.description.abstractThis paper describes an experimental program carried out at the University of Sheffield to investigate the interaction of local and distortional buckling in cold-formed steel lipped channel beams. The channels were arranged in a back-to-back configuration and a total of six tests, including three different cross-sectional geometries, were completed. The specimens were tested in a four-point bending configuration with simply supported boundary conditions while being laterally braced at the loading points. The beams failed in the constant moment span by interaction of local and distortional buckling. The geometric imperfections of the channels were recorded before the test using a specially designed measuring rig employing laser sensors. Tensile coupons were also extracted from the flat portions and the corner regions of the cross sections in order to determine the material properties. Comparisons showed good agreement between the experimental results and the predictions of European design guidelines and current North American provisions, whereas other DSM formulations based on the NLD and NDL concepts resulted in rather conservative predictions.
dc.publisherAmerican Society of Civil Engineers
dc.titleExperimental Investigation of Cross-Sectional Bending Capacity of Cold-Formed Steel Channels Subject to Local-Distortional Buckling Interaction
dc.typeJournal Paper
dc.journal.volume145
dc.journal.issue7
dc.journal.titleJournal of Structural Engineering
dc.identifier.doi10.1061/(ASCE)ST.1943-541X.0002344
dc.page04019064
dc.treeJournal of Structural Engineering:;2019:;Volume ( 145 ):;issue: 007
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record