Show simple item record

dc.contributor.authorCanhui Zhao
dc.contributor.authorKangkang Wang
dc.contributor.authorRongyao Xu
dc.contributor.authorKailai Deng
dc.contributor.authorBing Cui
dc.date.accessioned2019-09-18T10:37:53Z
dc.date.available2019-09-18T10:37:53Z
dc.date.issued2019
dc.identifier.other%28ASCE%29ST.1943-541X.0002338.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl1/handle/yetl/4259590
dc.description.abstractThis paper proposes a novel fully prefabricated composite deck system to achieve green and accelerated construction in bridge engineering. Ultra-high-performance concrete (UHPC), which has excellent mechanical properties, was employed as the main material of the prefabricated deck. Special connecting configurations, that is, steel plates with studs or pretensioned rebar, were used for enhancing the crack resistance of the steel-UHPC interface and facilitating convenient on-site assembly. Two sets of specimens featuring passive and active crack resistance were tested for investigation of the behavior of the composite deck under negative moment. The tests showed that the fully prefabricated composite deck provided satisfactory crack resistance compared with a traditional cast-in-place construction composite deck. On the basis of physical testing, a numerical model was built with Abaqus for further parametric analysis. Several design parameters were evaluated through supplementary analyses and recommendations were made for rebar pretension force and beam stiffener height.
dc.publisherAmerican Society of Civil Engineers
dc.titleDevelopment of Fully Prefabricated Steel-UHPC Composite Deck System
dc.typeJournal Paper
dc.journal.volume145
dc.journal.issue7
dc.journal.titleJournal of Structural Engineering
dc.identifier.doi10.1061/(ASCE)ST.1943-541X.0002338
dc.page04019051
dc.treeJournal of Structural Engineering:;2019:;Volume ( 145 ):;issue: 007
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record