| dc.contributor.author | Yike Zhang | |
| dc.contributor.author | Gary M. Raftery | |
| dc.contributor.author | Pierre Quenneville | |
| dc.date.accessioned | 2019-09-18T10:37:51Z | |
| dc.date.available | 2019-09-18T10:37:51Z | |
| dc.date.issued | 2019 | |
| dc.identifier.other | %28ASCE%29ST.1943-541X.0002336.pdf | |
| dc.identifier.uri | http://yetl.yabesh.ir/yetl1/handle/yetl/4259586 | |
| dc.description.abstract | This paper presents a study that examined the use of a new connection system in a prefabricated timber–concrete composite (TCC) beam in which a hardwood layer was glued to the top of a timber web to reinforce a dowel-type connection. Embedment tests highlighted the mechanical advantages associated with the use of Eucalyptus sideroxylon, which had a mean density of 1,080 kg/m3. The slip modulus of the proposed connection determined from double shear tests outperformed a prefabricated connection involving dowel connectors and no hardwood layer by 75%. Full-scale testing was undertaken on six beams, with two configurations of shear connectors studied. For each beam, the load-deflection behavior, relative slip between the concrete and timber at each connector, and strain profile at the midspan were measured. A simulation model was developed from which a parametric analysis was undertaken. Composite action of 81.9% was achieved when the minimum spacing was used. Using the γ-method as a design guideline is recommended. This connection system avoided the additional labor associated with using notches or adhesive at the interface and was easily fabricated. | |
| dc.publisher | American Society of Civil Engineers | |
| dc.title | Experimental and Analytical Investigations of a Timber–Concrete Composite Beam Using a Hardwood Interface Layer | |
| dc.type | Journal Paper | |
| dc.journal.volume | 145 | |
| dc.journal.issue | 7 | |
| dc.journal.title | Journal of Structural Engineering | |
| dc.identifier.doi | 10.1061/(ASCE)ST.1943-541X.0002336 | |
| dc.page | 04019052 | |
| dc.tree | Journal of Structural Engineering:;2019:;Volume ( 145 ):;issue: 007 | |
| dc.contenttype | Fulltext | |