Show simple item record

dc.contributor.authorKuppusamy, Vinoth Kumar
dc.contributor.authorKumar, Amit
dc.contributor.authorHoluszko, Maria
dc.date.accessioned2019-09-18T09:07:20Z
dc.date.available2019-09-18T09:07:20Z
dc.date.copyright4/19/2019 12:00:00 AM
dc.date.issued2019
dc.identifier.issn0195-0738
dc.identifier.otherjert_141_07_070708
dc.identifier.urihttp://yetl.yabesh.ir/yetl1/handle/yetl/4259116
dc.description.abstractWith the supply restriction from traditional rare earth deposits, alternative sources of rare earth elements (REEs) such as coal are being studied. The United States National Energy Technology Laboratory has identified US coal deposits as a potential source of rare earth elements. Several techniques such as physical separation, flotation, ion-exchange, agglomeration, and leaching are being evaluated for the successful exploitation of these elements from coal and its by-products. A previous study published in the Geoscience BC 2018 mineral report on the characterization of REE in the British Columbian coal samples have shown that a major portion of the rare earth in the run of mine coal reports to the middling and tailing streams. Hence, this study is focused on the extraction of the rare earth from coal tailings. Several studies have shown the use of an alkali-acid leaching process to successfully demineralize various high ash coals to produce a clean coal concentrate since the ash-bearing components such as clay and quartz were removed from the coal during this process. In this study, the alkali-acid leach process was adopted to chemically clean coal tailings as well as to extract rare earth elements. Different process parameters such as sodium hydroxide (NaOH) concentration, temperature, and time were studied. Results showed that it is possible to extract more than 85% of REE with this process and simultaneously produce clean coal from coal tailing.
dc.publisherAmerican Society of Mechanical Engineers (ASME)
dc.titleSimultaneous Extraction of Clean Coal and Rare Earth Elements From Coal Tailings Using Alkali-Acid Leaching Process
dc.typeJournal Paper
dc.journal.volume141
dc.journal.issue7
dc.journal.titleJournal of Energy Resources Technology
dc.identifier.doi10.1115/1.4043328
dc.journal.fristpage70708
dc.journal.lastpage070708-7
dc.treeJournal of Energy Resources Technology:;2019:;volume 141:;issue 007
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record