Show simple item record

dc.contributor.authorYang, Yongfei
dc.contributor.authorYang, Haiyuan
dc.contributor.authorTao, Liu
dc.contributor.authorYao, Jun
dc.contributor.authorWang, Wendong
dc.contributor.authorZhang, Kai
dc.contributor.authorLuquot, Linda
dc.date.accessioned2019-09-18T09:05:19Z
dc.date.available2019-09-18T09:05:19Z
dc.date.copyright3/27/2019 12:00:00 AM
dc.date.issued2019
dc.identifier.issn0195-0738
dc.identifier.otherjert_141_9_092903.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl1/handle/yetl/4258712
dc.description.abstractTo investigate the characteristics of oil distribution in porous media systems during a high water cut stage, sandstones with different permeability scales of 53.63 × 10−3 μm2 and 108.11 × 10−3 μm2 were imaged under a resolution of 4.12 μm during a water flooding process using X-ray tomography. Based on the cluster-size distribution of oil segmented from the tomography images and through classification using the shape factor and Euler number, the transformation of the oil distribution pattern in different injection stages was studied for samples with different pore structures. In general, the distribution patterns of an oil cluster continuously change during water injection. Large connected oil clusters break off into smaller segments. The sandstone with a higher permeability (108.11 × 10−3 μm2) shows the larger change in distribution pattern, and the remaining oil is trapped in the pores with a radius of approximately 7–12 μm. Meanwhile, some disconnected clusters merge together and lead to a re-connection during the high water cut period. However, the pore structure becomes compact and complex, the residual nonwetting phase becomes static and is difficult to move; and thus, all distribution patterns coexist during the entire displacement process and mainly distribute in pores with a radius of 8–12 μm. For the pore-scale entrapment characteristics of the oil phase during a high water cut period, different enhance oil recovery (EOR) methods should be considered in sandstones correspondent to each permeability scale.
dc.publisherAmerican Society of Mechanical Engineers (ASME)
dc.titleMicroscopic Determination of Remaining Oil Distribution in Sandstones With Different Permeability Scales Using Computed Tomography Scanning
dc.typeJournal Paper
dc.journal.volume141
dc.journal.issue9
dc.journal.titleJournal of Energy Resources Technology
dc.identifier.doi10.1115/1.4043131
dc.journal.fristpage92903
dc.journal.lastpage092903-11
dc.treeJournal of Energy Resources Technology:;2019:;volume 141:;issue 009
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record