Stress Corrosion Cracking Behavior of Tungsten Inert Gas Welded Age-Hardenable AA6061 Alloy

Abstract

The effects of two temper conditions (T4 and T6 heat treatments) upon the stress corrosion cracking (SCC) of AA6061 plates have been investigated in this work. AA6061 alloys were double-side-welded by the tungsten inert gas (TIG) welding method. SCC behavior of both the as-welded and as-received alloys was reported. Optical microscopy (OM) and scanning electron microscopy (SEM) were used to determine the precipitate structure of the thermal-altered zones and the base metal (BM), and also the hardness variations were examined using microhardness testing (Vickers hardness). The small-size precipitate structures in the T6 tempered alloy and the coarser precipitate structures in the T4 tempered alloy were found by microstructural investigations. As a result, T4 temper heat treatment of this alloy considerably reduced its susceptibility to stress corrosion cracks due to relatively coarse and more separate precipitate morphology. In welded specimens, SCC failure occurred in the area between the heat-affected zone (HAZ) and the base metal. Stress corrosion resistance in the fusion zone was strong in both temper conditions. The aim of this work was to obtain the effects of heat treatment and welding on SCC behavior of the age-hardenable aluminum alloy. The authors conclude that a deep insight into the SCC resistance of AA6061 alloy indicates the precipitate particle distributions and they are the key point for AA6061 alloy joints in chloride solution.