Show simple item record

dc.contributor.authorElkatatny, Salaheldin
dc.contributor.authorBasfer, Salem
dc.contributor.authorShawabkeh, Reyad
dc.contributor.authorBahgat, Mohamed
dc.contributor.authorMahmoud, Mohamed
dc.date.accessioned2019-09-18T09:02:24Z
dc.date.available2019-09-18T09:02:24Z
dc.date.copyright6/20/2019 12:00:00 AM
dc.date.issued2019
dc.identifier.issn0195-0738
dc.identifier.otherjert_141_12_122904
dc.identifier.urihttp://yetl.yabesh.ir/yetl1/handle/yetl/4258150
dc.description.abstractThe solubility of hydrogen sulfide (H2S) is very high in different liquids such as water or liquid sulfur. The existence of H2S results in local corrosion and causes cracking to the steel even if the concentration of H2S is low. The objectives of this paper are to (1) evaluate copper nitrate as an H2S scavenger while drilling sour horizontal and multilateral wells and (2) investigate the effect of copper nitrate on the drilling fluid rheological properties and drill pipe corrosion. The obtained results showed that by adding the copper nitrate (1 lb/bbl) to the drilling mud there was no change in the shear stress–shear rate behavior, and the yield point (YP) plastic viscosity (PV) ratio was increased by 20% indicating good hole cleaning. In addition, the filtrate volume reduced by 26% and the filter cake thickness decreased by 50%. The new formulation of the drilling fluid with the copper nitrate is not corrosive (the corrosion rate was 0.00084 lb/ft2 after 24 h at 212 °F). Breakeven experiments showed that adding copper nitrate to the drilling fluid doubled the adsorption capacity when compared with triazine and tripled the capacity when compared with Scav1 when using I lb of the commercial H2S scavenger per bbl of the drilling fluid.
dc.publisherAmerican Society of Mechanical Engineers (ASME)
dc.titleAssessment of Using Copper Nitrate for Scavenging Hydrogen Sulfide While Drilling Sour Horizontal Wells
dc.typeJournal Paper
dc.journal.volume141
dc.journal.issue12
dc.journal.titleJournal of Energy Resources Technology
dc.identifier.doi10.1115/1.4043879
dc.journal.fristpage122904
dc.journal.lastpage122904-7
dc.treeJournal of Energy Resources Technology:;2019:;volume 141:;issue 012
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record