Show simple item record

dc.contributor.authorYing Zhou;Peng Chen;Gilberto Mosqueda
dc.date.accessioned2019-06-08T07:23:55Z
dc.date.available2019-06-08T07:23:55Z
dc.date.issued2019
dc.identifier.other%28ASCE%29EM.1943-7889.0001611.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl1/handle/yetl/4256988
dc.description.abstractA novel nonlinear isolation system designed for buildings is proposed to isolate vibrations in the vertical direction. The system is characterized by quasi-zero stiffness (QZS) obtained by combining linear springs in parallel with disk springs having nonlinear stiffness, including a region with negative stiffness. Static analysis was first applied to establish the force-displacement relation of the bearings and then determine the dynamic equations of motion. Two approximate analytical methods, the average method (AM) and harmonic balance method (HBM), were applied to solve this nonlinear vibration problem, and their suitability was examined. Based on the theoretical response, the transmissibility function was defined to gain insight into the system’s dynamic characteristics and evaluate the isolation properties. The resulting curves show that the QZS system can be effective for vertical isolation, with results dependent on external input magnitude and the damping level. Larger-amplitude excitation and higher damping level tend to increase the isolation starting frequency above which the transmissibility reduces the vibration of the superstructure. Finally, the nonlinear transmissibility curves were compared with equivalent linear curves, and a numerical comparison between a traditional building and a QZS vertically isolated building under seismic excitations was conducted. The comparison revealed significant advantages to adopting the QZS system in vertical isolation.
dc.publisherAmerican Society of Civil Engineers
dc.titleAnalytical and Numerical Investigation of Quasi-Zero Stiffness Vertical Isolation System
dc.typeJournal Article
dc.journal.volume145
dc.journal.issue6
dc.journal.titleJournal of Engineering Mechanics
dc.identifier.doidoi:10.1061/(ASCE)EM.1943-7889.0001611
dc.page04019035
dc.treeJournal of Engineering Mechanics:;2019:;Volume (0145):;issue:006
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record