Show simple item record

dc.contributor.authorAbdelgawad, Khaled
dc.contributor.authorElkatatny, Salaheldin
dc.contributor.authorMoussa, Tamer
dc.contributor.authorMahmoud, Mohamed
dc.contributor.authorPatil, Shirish
dc.date.accessioned2019-03-17T11:12:28Z
dc.date.available2019-03-17T11:12:28Z
dc.date.copyright1/9/2019 12:00:00 AM
dc.date.issued2019
dc.identifier.issn0195-0738
dc.identifier.otherjert_141_03_032908.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl1/handle/yetl/4256810
dc.description.abstractThe rheological properties of the drilling fluid play a key role in controlling the drilling operation. Knowledge of drilling fluid rheological properties is very crucial for drilling hydraulic calculations required for hole cleaning optimization. Measuring the rheological properties during drilling sometimes is a time-consuming process. Wrong estimation of these properties may lead to many problems, such as pipe sticking, loss of circulation, and/or well control issues. The aforementioned problems increase the non-productive time and the overall cost of the drilling operations. In this paper, the frequent drilling fluid measurements (mud density, Marsh funnel viscosity (MFV), and solid percent) are used to estimate the rheological properties of bentonite spud mud. Artificial neural network (ANN) technique was combined with the self-adaptive differential evolution algorithm (SaDe) to develop an optimum ANN model for each rheological property using 1029 data points. The SaDe helped to optimize the best combination of parameters for the ANN models. For the first time, based on the developed ANN models, empirical equations are extracted for each rheological parameter. The ANN models predicted the rheological properties from the mud density, MFV, and solid percent with high accuracy (average absolute percentage error (AAPE) less than 5% and correlation coefficient higher than 95%). The developed apparent viscosity model was compared with the available models in the literature using the unseen dataset. The SaDe-ANN model outperformed the other models which overestimated the apparent viscosity of the spud drilling fluid. The developed models will help drilling engineers to predict the rheological properties every 15–20 min. This will help to optimize hole cleaning and avoid pipe sticking and loss of circulation where bentonite spud mud is used. No additional equipment or special software is required for applying the new method.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleReal-Time Determination of Rheological Properties of Spud Drilling Fluids Using a Hybrid Artificial Intelligence Technique
dc.typeJournal Paper
dc.journal.volume141
dc.journal.issue3
dc.journal.titleJournal of Energy Resources Technology
dc.identifier.doi10.1115/1.4042233
dc.journal.fristpage32908
dc.journal.lastpage032908-9
dc.treeJournal of Energy Resources Technology:;2019:;volume( 141 ):;issue: 003
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record